Possible Repair Scenarios for Shower Cabin Leakage

After initial inspection, the leakage may be caused by one of the following conditions:

Option 1: Resealing Shower Base and Joints
Scope of Work:
Remove old silicone around the shower base and frame, clean and dry all surfaces, apply new waterproof silicone sealing to prevent water escape.

Option 2: Repair Drain Connection (Access from Shower Skirt/Panel)
Scope of Work:
Open the shower base access panel or remove front skirt, inspect drainage outlet, tighten connections, reseal or replace rubber gasket if required, and test for leakage.

Option 3: Adjust or Replace Drain Pipe / Trap
Scope of Work:
Access underneath the shower tray, adjust pipe alignment, repair or replace damaged pipe or trap, ensure proper water flow and sealing, and perform leak testing.

Option 4: Partial Dismantling of Shower Base
Scope of Work:
Carefully lift or partially dismantle the shower tray to access hidden drainage area, repair leaking points, reinstall tray, and reseal all joints.

Option 5: Full Dismantling and Reinstallation of Shower Unit
Scope of Work:
Remove complete shower enclosure and base, repair or replace drainage system, reinstall unit properly, apply full waterproof sealing, and conduct final leak testing.

Note:
Final repair method will be confirmed after detailed inspection on site. We will always proceed with the least invasive and most cost effective solution first.